Views: 0 Author: Site Editor Publish Time: 2024-10-12 Origin: Site
Gas stoves are used almost every day in every household. Therefore, it is very important to choose a good gas stove. However, when choosing a gas stove, many friends often don't care.
Most of them are purchased with range hoods.
Therefore, here is a summary of the suggestions for the purchase of gas stoves: it is recommended that you insist on the following 6 do not buy.
All are divided into six parts: cast iron stoves and fire covers are not bought; Do not buy without flameout protection device; Do not buy without gas leakage alarm function; If the heat load is less than 5 kilowatts, do not buy; If the thermal efficiency is less than 63%, do not buy; The flame appears yellow and does not buy.
In fact, for gas stoves, the main part we can see is its stove head.
The material of the stove is a very critical part of this gas stove.
At present, the materials of the stove are cast iron and cop
per.
However, there is not much difference in the use of these two materials.
However, the difference in results is significant.
Here, it is recommended that you do not buy cast iron, but try to buy copper.
Because cast iron stoves, although cheaper, are prone to rust. Moreover, some rust spots are easy to adhere to, which is not only unsightly, but also affects the combustion effect of the gas.
Copper stoves, on the other hand, are much better in this respect. Not only is it not easy to get dirty, but it is also not easy to corrode, and it takes a long time.
This point is related to the safe use function of gas stoves.
Because, for many of us, there may be a situation where we stew vegetables and boil porridge, but forget about it.
In fact, there may be a situation where water splashes out and then the gas stove is extinguished.
Because after the fire is extinguished, there is no protective device, and then there is a gas leak, and it is likely that there will be a big problem.
If there is a flame-out protection device, even if the fire is extinguished, the gas will be automatically disconnected, so there is no need to worry.
Therefore, I personally advise everyone that when choosing a gas stove, you must see if there is a flame-out protection device. Otherwise, don't buy it. Because safety is the most important thing.
The gas leakage alarm function of the gas stove is also a safety protection device.
In fact, for some safety functions of the gas stove, try to have it, which can not be cheap.
Although the gas stove may be out of gas if it is turned off, if there is a slow air leak, it may not be monitored.
At this time, we need another function, which is the alarm device for gas leakage.
Gas leakage alarm device, which can be monitored in real time. The concentration of the gas will sound as soon as it reaches the limit of the alarm, and many can automatically cut off the gas.
Therefore, in order to use it safely, it is still necessary to choose a gas stove with a gas alarm function.
The heat load of the gas stove is a very important parameter index of the gas stove.
If you buy a gas stove, you will find that most of the gas stoves have a heat load of around 5 kilowatts.
However, after you actually experience it, you will find that if the heat load of the gas stove is less than 5 kilowatts, you will always feel that the cooking is very slow.
In particular, some families are particularly fond of stir-frying, and if the gas stove does not reach 5 kilowatts, you will find it difficult to stir-fry.
Moreover, the gas stove with low firepower does not taste so good when it comes to stir-frying.
Because for most of our Chinese families, they like to stir-fry on high heat, which is more in line with our taste.
The heat is too small, not only is the stir-fry slow cooking, but also the taste we need is not achieved.
Therefore, when we choose a gas stove, we really have to pay attention to the size of the fire power of the gas stove.
In this regard, I personally suggest that for the needs of most of our families, when choosing a gas stove, the firepower should be as large as possible, at least not less than 5 kilowatts.
When buying a household gas stove, you also need to pay attention to the thermal efficiency of the gas stove.
The so-called thermal efficiency of a gas stove is the efficiency of heat utilization when gas is burning. If the thermal efficiency is high, then the gas utilization rate is high, and the end result is that the cost of gas may be saved.
If the thermal efficiency of the gas stove is very low, burning a lot of natural gas is actually wasted, and it will be more expensive overall.
For most gas stoves, the thermal efficiency can basically reach 55%. For example, gas stoves, which are more common with three-level energy efficiency.
When we choose, we try to choose the best one. The point of view given by the individual is that you can choose a level of energy efficiency, and try to choose a level of energy efficiency. The efficiency should be no less than 63%.
It may be that the gas stove with a first-class energy efficiency of 63% will be more expensive, and many friends may feel distressed.
But if we use it over the years. Compare the traditional three-level energy efficiency gas stove, and you will find that it is still cost-effective.
Therefore, I personally advise everyone to choose a first-class energy efficiency with high thermal efficiency for gas stoves, and don't be greedy for cheap, and then choose a third-level energy efficiency.
When we buy a gas stove, many friends may not try the burning state of the gas stove.
In fact, for the burning state of the gas stove, it is still necessary to try it on the spot.
Because the state of the gas stove burning flame can reflect the effect of gas combustion and our final cooking effect to a certain extent.
This brings us to the question of whether the flame of the gas cooker burns sufficiently.
Gas cooktops that burn inadequately, have uneven flames, or even show a yellow flame cannot be bought.
For example, when we go to buy a gas stove, we find that the flames appear of different sizes and sway left and right, which is actually insufficient combustion.
For these gas cooktops with uneven flames, the experience brought to us is very poor. When stir-frying, some places are pasty, and some places are not cooked, which is very bad.
And those gas stoves with yellow flames are generally caused by insufficient gas combustion and low gas utilization, so don't buy them.
Because if the gas stove burns sufficiently, the flame that appears is pale blue, and the flame is very stable. If there is no wind, there will be no swaying from side to side.
Therefore, when we buy a gas stove, we must observe it clearly. Because this point is still relatively related to our subsequent use.
Household gas stove, although it is not expensive. However, it is all about our use. So, it is really necessary to choose a good gas stove. When buying a gas stove, avoid these problems. After that, you can basically choose the ideal gas stove.
