Stainless Steel Electric Juicer,Centrfugal Juicer for Fruits&Vegetables

1. Product Overview

This high-efficiency centrifugal juicer features a stainless steel body, multi-speed settings, a large feed chute, and separate pulp/juice containers. It is designed for quickly extracting juice from fruits and vegetables, separating juice from pulp for smooth, fresh drinks.

2. Usage Instructions

Pre-Use Preparation

1. Unpack and Assemble: Wash all removable parts (feed chute, pusher, pulp container, juice jug, lid, filter basket) with warm soapy water. Dry thoroughly before assembling.

2. Check Assembly: Ensure all parts are securely locked into place, especially the lid, filter basket, and safety lock mechanism. The juicer will not operate if parts are not correctly assembled.

3. Prepare Ingredients: Wash fruits/vegetables thoroughly. Cut large produce into pieces small enough to fit the feed chute. Remove hard seeds, pits, thick peels (e.g., citrus rinds), and inedible parts.

Operating the Juicer

1. Place on a Stable Surface: Set the juicer on a flat, dry, stable countertop near a power outlet. Ensure the pulp container and juice jug are correctly positioned.

2. Plug In: Connect the power cord to the outlet.

3. Select Speed:

   • Speed 1 (Low): For soft fruits/vegetables (e.g., oranges, grapes, tomatoes, watermelon).

   • Speed 2 (High): For hard fruits/vegetables (e.g., apples, carrots, beets, celery).

4. Start Juicing: Turn the speed knob to your desired setting. The motor will start. Slowly place ingredients into the feed chute, using the food pusher to guide them down. Do not push ingredients with your fingers or utensils.

5. During Operation: The juice will flow into the juice jug, and pulp will collect in the pulp container. If the pulp container becomes full, stop the juicer, empty it, and resume.

6. Finish Juicing: After all ingredients are processed, let the motor run for a few seconds to clear remaining pulp from the filter basket. Turn the knob to “0 (Off)”, wait for the motor to stop completely, then unplug the device.

3. Important Safety Precautions

• Read all instructions before use: Improper use can cause injury or damage to the appliance.

• Electrical safety:

  • Do not immerse the motor base in water or any liquid. Wipe it with a damp cloth only.

  • Unplug the juicer before assembling, disassembling, cleaning, or if it malfunctions.

  • Do not use the juicer if the power cord is damaged, or if the appliance has been dropped or damaged. Contact customer service for repairs.

• Operational safety:

  • Never put fingers or utensils into the feed chute while the juicer is running. Only use the included food pusher.

  • Do not overload the juicer or insert ingredients faster than the motor can process them.

  • Do not run the juicer continuously for more than 1 minute (follow the specific model’s duty cycle). Let it cool down for 2-3 minutes between batches to prevent overheating.

  • Do not juice extremely hard or fibrous ingredients (e.g., sugarcane, large nuts, ice) as they can damage the filter basket or motor.

  • Do not open the lid or disassemble the juicer while it is running or until the motor has completely stopped.

• Personal safety:

  • The filter basket is very sharp. Handle it with care during cleaning and assembly.

  • Keep the juicer out of reach of children. Do not allow children to use it unsupervised.

4. Maintenance & Care

Cleaning

1. Disassemble: After use, unplug the juicer and disassemble all removable parts immediately. Do not let pulp dry on the filter basket, as it will be hard to clean.

2. Wash Parts: Rinse all removable parts under running water. Use a soft brush (included, if available) to gently scrub the filter basket to remove fine pulp particles.

3. Clean the Motor Base: Wipe the stainless steel motor base with a damp cloth. Do not use abrasive cleaners, as they can scratch the surface.

4. Dry: Dry all parts thoroughly with a towel before storing or reassembling.

• Note: Most removable parts are top-rack dishwasher safe (check the user manual for your specific model), but hand washing is recommended to extend the life of the filter basket.

Storage

• Store the juicer in a cool, dry place.

• Keep all parts together to avoid losing small components. Do not wrap the power cord too tightly around the base, as this can damage the cord.