Socket Mini Ceiling Fan with Light,2-in-1 LED Bulb Fan with 3 Blades

1. Instructions for Use

1.1 Installation

1. Safety First: Turn off the power to the light socket at the circuit breaker before installation.

2. Inspect the Fan: Check the fan, blades, and bulb base for any visible damage before installation.

3. Screw the Fan In: Hold the fan unit and carefully screw the E26/E27 bulb base into the standard light socket until it is securely tightened.

4. Power On: Restore power to the socket. The fan is typically controlled by the existing wall light switch.

1.2 Operation

1. Control: This fan is usually controlled by the light switch.

   • Basic model: Turning the switch on/off cycles through fan speeds (Low → Medium → High → Off).

   • With remote control (if included): Use the remote to adjust speed, turn on/off, or set a timer.

2. Adjustment: The soft blades are designed to operate quietly and safely. The airflow direction is set by the fixed mounting position.

2. Important Safety & Usage Precautions

• Electrical Safety

  • Always turn off the power at the circuit breaker before installing, removing, or cleaning the fan.

  • Only install the fan into a standard, properly grounded light socket. Do not use it with dimmer switches, smart plugs, or non-standard sockets unless the fan is explicitly rated for such use.

  • Do not exceed the socket’s wattage/amp rating. This fan is designed for low-power operation.

• Usage Safety

  • Keep hands, hair, clothing, and foreign objects at least 30 cm away from the fan blades while it is operating.

  • Do not use the fan in damp or wet locations (bathrooms, outdoor areas exposed to rain) to avoid electric shock hazards.

  • Do not operate the fan if the blades are damaged, cracked, or missing. Stop use immediately if the fan wobbles, makes unusual noise, or emits a burning smell.

• Environmental & Installation Notes

  • Install the fan only in locations with at least 2.3 meters (7.5 feet) of clearance from the floor to prevent accidental contact with the moving blades.

  • Do not install the fan near curtains, hanging plants, or other objects that could come into contact with the blades.

3. Cleaning, Maintenance & Repair

3.1 Cleaning & Maintenance

1. Turn Off Power: Always turn off the power at the circuit breaker before cleaning.

2. Clean the Blades and Housing:

   • Use a soft, dry microfiber cloth to gently wipe dust from the blades and motor housing.

   • For stubborn dust, use a slightly damp (not wet) cloth. Never use water directly on the motor housing or electrical base.

   • Do not use harsh chemicals, abrasive cleaners, or compressed air, as these can damage the soft blades or the motor.

3. Check Tightness: Periodically check that the fan is securely screwed into the socket and that the blades are not loose.