Clip-on Mini Desk Fan,3-blade Portable USB Fan with Adjustable Neck&on/off Switch for Ben,office&stroller

Usage Instructions

1. Setup & Placement

   • Open the clip base and secure the fan to a stable surface (desk edge, bed frame, shelf) no thicker than the clip’s maximum opening. Ensure it is firmly attached to prevent falling.

   • Adjust the flexible gooseneck to position the airflow where you want it.

   • Plug the USB cable into a compatible power source (USB adapter, power bank, laptop, etc.).

2. Operation

   • Power On/Off: Press the power button to turn the fan on/off.

   • Speed Adjustment: Most models have 2–3 speed levels. Press the speed button to cycle through low/medium/high settings.

   • Angle Adjustment: The gooseneck allows 360° direction adjustment. Bend it gently to point airflow up, down, or sideways.

   • Auto-Off (if applicable): Some models have a timer function (1/2/4 hours). Refer to the indicator light to set the timer.

3. Shutdown & Storage

   • Unplug the fan from the power source when not in use.

   • Gently straighten the gooseneck (do not forcefully twist it) and store in a cool, dry place.

⚠️ Safety & Usage Notes

General Safety

• Keep Dry: Do not use or store the fan in humid environments (bathroom, kitchen near sinks) to avoid electric shock or damage.

• Power Source: Only use a compatible 5V USB power adapter (rated 1A or above). Do not use high-voltage adapters, as this can burn out the motor.

• No Blockages: Do not insert fingers, pens, or other objects into the fan blades while it is running. Keep hair, clothing, and jewelry away from the moving parts.

• Supervise Children: Keep the fan out of reach of children under 6 years old to prevent injury or misuse.

Usage Restrictions

• Do Not Overload the Clip: Do not hang heavy objects on the clip, and do not attach it to unstable or slippery surfaces.

• Avoid Continuous Overuse: If using the fan continuously for more than 8 hours, turn it off for 30 minutes to let the motor cool down (especially at high speed).

• No DIY Modifications: Do not disassemble, modify, or repair the fan yourself. This will void the warranty and may cause safety hazards.

️ Cleaning & Maintenance

Regular Cleaning (Every 1–2 Weeks)

1. Unplug the fan completely before cleaning.

2. Use a soft, dry brush or cotton swab to gently brush dust off the blades and protective grille.

3. For stubborn dirt, use a slightly damp cloth (not dripping wet) to wipe the surface. Do not use harsh chemicals or abrasive cleaners.

4. Ensure all parts are fully dry before plugging the fan back in.

Long-Term Care

• Gooseneck: Do not bend the gooseneck at extreme angles repeatedly, as this can weaken the internal wiring.

• Clip Mechanism: Wipe the clip’s rubber pads with a damp cloth to remove dust and oil, which helps maintain grip strength.

• Storage: If storing for a long time, place the fan in its original box or a dust bag, and keep it away from direct sunlight.