Portable Ceramic Space Heater,1200W Mini Electric Heater with Tip-over Protection for Desk&bedroom

Usage Instructions

1. Placement

   • Place the heater on a flat, stable, and heat-resistant surface. Ensure the unit is upright and the air inlet/outlet is not blocked. Keep at least 30cm of clearance around the heater for proper airflow.

2. Powering On

   • Plug the heater directly into a properly grounded wall outlet. Do not use extension cords or power strips.

   • Locate the control knob/button (usually on the side of the unit). Press or turn it to select the desired mode:

     • Fan Mode (optional): Blows cool air for ventilation.

     • Low Heat Mode: Gentle heating at lower power.

     • High Heat Mode: Fast, powerful heating.

3. Adjusting Airflow (if applicable)

   • Adjust the tilt angle of the heater body (supported by the stand) to direct warm air to your preferred area.

4. Shutting Down

   • Turn the control knob to the "OFF" position.

   • Unplug the heater from the outlet when not in use, especially when leaving the area for an extended period.

   • Note: Some models will continue blowing cool air for 30 seconds after shutdown to dissipate residual heat.

⚠️ Safety Precautions

• Fire Hazard Prevention

  • Do not place the heater near flammable materials such as curtains, bedding, paper, or furniture. Maintain a minimum 1-meter safety distance.

  • Never cover the heater or block the air intake/outlet with any objects.

  • Do not use the heater in wet environments (bathrooms, showers, near water sources) to avoid electric shock.

• Electrical Safety

  • Use only a grounded power outlet rated for the heater’s power consumption. Do not share the outlet with other high-power appliances.

  • Do not use the heater if the power cord or plug is damaged. Keep the cord away from heated surfaces.

  • Unplug the heater before cleaning, moving, or performing any maintenance.

• Operational Safety

  • Do not leave the heater unattended while in use, especially around children or pets.

  • The heater has built-in overheat protection and tip-over protection. If the unit overheats or is knocked over, it will automatically shut off.

  • Do not insert foreign objects into the air inlet or outlet, as this may damage the internal components or cause electric shock.

  • Do not use the heater as a dryer for clothes, towels, or other items.

Maintenance & Repair

Cleaning

1. Unplug the heater and let it cool completely (at least 30 minutes) before cleaning.

2. Use a soft, dry cloth to wipe the exterior surface. For stubborn stains, use a slightly damp cloth (do not soak the unit).

3. Clean the air inlet/outlet grille regularly with a soft brush or a low-powered vacuum cleaner to remove dust buildup, which can cause overheating.

4. Never immerse the heater in water or use liquid cleaners directly on the unit.