Cordless Electric Mop with Water Spray, Self-Propelled Floor Cleaner with Dual-Side Rotating Heads for Hardwood & Tile

Instructions for Use

Preparation & Assembly

1. Unpack & Assemble: Insert the handle into the main mop body until it clicks into place. Ensure all connections are secure.

2. Fill the Water Tank:

   • Locate the water tank on the mop head and remove the cap.

   • Fill it with clean water (or a small amount of suitable floor cleaner, as specified by the manufacturer). Do not use harsh chemicals or bleach.

   • Close the cap tightly to prevent leaks.

3. Charge the Mop:

   • Connect the included charging cable to the mop and a power outlet.

   • The indicator light will turn on (red = charging, green = fully charged). A full charge typically takes 2–3 hours.

Operating the Mop

1. Power On: Press the power button on the handle/body to turn on the device. The dual mop pads will start rotating.

2. Start Cleaning:

   • Hold the handle and guide the mop across the floor. The self-driven rotating pads will move the mop forward with minimal effort.

   • To spray water, press the spray button on the handle. Adjust the spray frequency as needed for different messes.

3. Clean Different Surfaces:

   • Suitable for hard floors like wood, tile, laminate, and vinyl.

   • For stubborn stains, apply a small amount of spray and let the rotating pads work for a few seconds before wiping.

4. Shut Down: When finished, press the power button to turn off the mop.

Post-Use Care

1. Remove & Clean Pads:

   • Detach the microfiber pads from the mop head. They are usually machine-washable (use mild detergent, air dry).

2. Empty the Water Tank: Pour out any remaining water/cleaner and rinse the tank with fresh water to prevent buildup.

3. Store the Mop: Place it upright in a cool, dry area. Avoid storing it with wet pads to prevent mold.

⚠️ Safety Precautions

1. Electrical Safety

   • Only use the charger provided with the mop. Do not use damaged cables or adapters.

   • Do not immerse the main body or charging base in water. Wipe spills immediately.

   • Unplug the mop before cleaning, maintenance, or if it malfunctions.

2. Usage Safety

   • Do not use the mop on carpets or uneven surfaces that may jam the rotating pads.

   • Keep the mop and its cord away from heat sources (e.g., stoves, heaters).

   • Do not leave the mop unattended while powered on, especially around children or pets.

   • Avoid spraying water directly at electrical outlets, appliances, or wall sockets.

3. Battery Safety

   • Do not expose the mop to extreme temperatures (below 0°C/32°F or above 40°C/104°F).

   • If the battery swells, leaks, or emits strange odors, stop using the mop immediately and contact customer service.

Maintenance & Troubleshooting

Routine Maintenance

1. Pad Care: Clean the pads after each use. Replace them every 3–6 months (or when they become worn) to maintain cleaning efficiency.

2. Nozzle Cleaning: If the spray function weakens, check the spray nozzle for clogs. Rinse the nozzle with warm water or use a soft brush to remove debris.

3. Battery Health: For long-term storage, charge the mop to 50% and store it in a cool, dry place. Recharge it every 2–3 months to preserve battery life.