FH-LJT012
| Availability: | |
|---|---|
| Quantity: | |
Product Name | Automatic Infrared Sensor Trash Can |
Material | High density thick BPA-free environmental plastic |
Available Color | White/Black |
Core Parameter | 0.3s quick open,12-inch sensing range,soft close damping lid |
Control Mode | Auto infrared induction=Manual fixed open lock |
0.3s Instant Auto Open & 12 Inch Wide Sensing Distance
Built-in high-precision infrared motion sensor, the lid pops open within 0.3 seconds once your hand or waste is within 12-inch sensing area, fully touch-free design avoids direct contact with bacteria and dirty garbage, keep hands hygienic during daily waste disposal.
Silent Soft Close & Effective Odor Control
Adopts damping soft-close structure, the lid shuts down slowly and quietly without loud collision noise after throwing rubbish. Fully sealed cover tightly locks unpleasant odor inside the bin, stop bad smell spreading and prevent flies & bugs crawling into the trash can all day long.
Dual Control Mode: Auto Induction + Manual Fixed Open
Equipped with two functional buttons on the front control panel. Switch to auto sensor mode for daily normal use; turn on manual lock mode to keep lid permanently open when cleaning or dumping large-volume garbage, greatly improve your using flexibility.
Slim Vertical Space-Saving Shape & Perfect Bag Fix Design
Sleek rectangular upright body takes less floor space, can be placed beside cabinet, toilet or narrow corner seamlessly. Built-in inner plastic rim fixes trash bags firmly to prevent slipping down into the bucket, convenient for quick replacement of garbage bags.
Premium Thick BPA-Free Plastic, Easy to Wipe Clean
Constructed with sturdy thickened environmental plastic, anti-drop, wear-resistant and no peculiar smell. Smooth inner & outer surface is stain-resistant, just wipe with damp cloth to finish cleaning quickly, long service life for years of frequent household use.
Multi-scene Universal Application
Ideal versatile storage solution for multiple rooms: kitchen for food scraps, bathroom for sanitary waste, bedroom for daily litter and office for paper scraps, fit all indoor household & commercial occasions.
Open the battery compartment at the bottom/back of the trash can, install 4×AA alkaline batteries (not included in package) following positive/negative polarity marks, then close the battery cover tightly.
The built-in infrared motion sensor has a 12-inch (30cm) sensing range; when your hand/garbage is within the sensing zone above the lid, the lid automatically pops open in 0.3 seconds quickly.
Toss waste into the bin after the lid opens; the lid will automatically close slowly with soft-close damping design after several seconds of no detected movement.
Long press the control button on the top panel to keep the lid open permanently for large-volume garbage disposal; short press again to switch back to auto-sensing mode.
Lift the whole lid assembly off the can body, fit the trash bag around the top inner rim, tuck excess bag edge under the bin’s top sealing strip, then reinstall the lid.
Battery Safety
Do not mix old and new batteries / different types of batteries; remove batteries if the can will not be used for over 30 days to avoid liquid leakage damaging internal circuits.
Sensor Protection
Keep the infrared sensor window clean and dry; do not scratch, paste stickers or splash water/garbage residue onto the sensor area, which will block signal induction.
Environment Limit
Indoor use only; avoid placing in direct strong sunlight (strong ultraviolet disturbs infrared sensing) or damp bathroom with long-term water splash.
Keep away from heating appliances (heater, stove), high temperature deforms plastic parts and damages electronic components.
Garbage Restriction
Do not pour boiling water, corrosive chemical waste into the bin; sharp hard trash shall be wrapped to prevent puncturing inner bucket and scratching lid.
Daily Cleaning
Wipe can surface with soft damp cloth; never rinse the whole bin directly under running water (water seepage causes short circuit of control board).
Fault Phenomenon | Inspection & Fix Method |
|---|---|
Lid fails to auto-open | 1. Check if batteries are exhausted → replace new alkaline batteries; 2. Wipe dirty sensor lens with dry cloth; 3. Confirm no strong light shining directly to sensor |
Lid cannot close automatically | Check if foreign debris jams lid hinge gap; remove stuck trash and reset |
Lid opens and closes repeatedly abnormally | Move the bin away from reflective objects/mirror near sensing area; avoid airflow disturbance from fan/air conditioner |
Non-professional users are forbidden to disassemble the internal control circuit board and motor components privately; unauthorized disassembly voids product warranty.
If internal motor/circuit is damaged by water immersion or battery leakage, contact after-sales service for professional replacement instead of self-repair.
Wear parts (lid sealing strip, hinge rubber pad) can be purchased as spare parts from official store for user self-replacement.
When storing long-term, take out all batteries, clean bin interior completely, place in cool dry place avoiding extrusion and heavy compression.